To make sure this part does fit your vehicle Check The Fit
Accessory Drive Belt Kit - Crp/contitech (inches) - ContiTech OE Quality Accessory Drive Kit (Part Number: ADK0012P)
- AAIA Part Type Description: Drive Belt Kit
- Product Description - Invoice: ContiTech Accessory Drive Kit
- Marketing Description: This ContiTech OE Quality Accessory Drive Kit includes a serpentine belt (Conti), tensioner (OE) and two idler (Litens and Schaefflers). Everything needed to perform a proper serpentine belt change for the applications covered by this kit. Serpentine Belts are used for driving accessory componnets that are mounted on the engine. These include the alternator, the cooling water pump, the air conditioning compressor and the power steering pump. A lower profile design provides less noise and cooler running. And with service life intervals equal to or greater than the parts they are designed to replace, ContiTech serpentine belts are truly worry-free.
- Short Product Description: Accessory Drive Kit
- CTO: TR
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDR Required Flag: N
- Maximum Cases per Pallet Layer: 6
- Pallet Layer Maximum: 3
- Application Type: Application Specific
- Belt Length (Inches): 94.65
- Belt Length (Metric): 2404.00
- Bullet Point 1: All components are either the OE component or a direct fit to the original equipment.
- Bullet Point 2: Serpentine belt delivers 98% power efficiency and the lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures.
- Bullet Point 3: Serpentine Belt is designed to be oil-resistant and temperature-stable from -22DegF to 176DegF (-30DegC to 80DegC).
- Bullet Point 4: The Serpentine Belt high performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design.
- Bullet Point 5: Includes OE Quality idler and tensioner bearings for the accessory drive system.
- Bullet Point 6: All components are either the OE component or a direct fit to the original equipment.
- Flight Restricted: N
- Inches Size Stock: PK060947
- Installation Instructions Included: N
- Is the Installation Hardware Included: Y
- Keep From Freezing: N
- Link to Manufacturer Page: www.contibelts.com
- MM Size Stock: 6K2404
- Number of Teeth: 6
- Qty of Belts in Kit: 1
- Qty of Idlers in Kit: 1
- Qty of Tensioner Bearings in Kit: 2
- Warranty Distance: 24000
- Warranty Distance UOM: MI
- Warranty Time: 24
- Warranty Time UOM: MO
- Manufacturer:
- Crp/contitech (inches)
- Part Number:
- ADK0012P
- Manufacturer Part Number:
- ADK0012P
- Description:
- Accessory Drive Belt Kit
- Long Description:
- ContiTech OE Quality Accessory Drive Kit
- Part Type:
- Accessory Drive Belt Kit
- Category:
- Belts And Cooling
- Subcategory:
- Accessory Drive Belt System Components
- Warehouse Notes:
- METRIC MULTI V-BELT & TENSNR K
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 4.02 lbs.
- Height:
- 4"
- Width:
- 8.75"
- Length:
- 8.75"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 843266038888
- Item Location:
- LH86P5
Technical Details
- AAIA Part Type Description
- Drive Belt Kit
- Product Description - Invoice
- ContiTech Accessory Drive Kit
- Marketing Description
- This ContiTech OE Quality Accessory Drive Kit includes a serpentine belt (Conti), tensioner (OE) and two idler (Litens and Schaefflers). Everything needed to perform a proper serpentine belt change for the applications covered by this kit. Serpentine Belts are used for driving accessory componnets that are mounted on the engine. These include the alternator, the cooling water pump, the air conditioning compressor and the power steering pump. A lower profile design provides less noise and cooler running. And with service life intervals equal to or greater than the parts they are designed to replace, ContiTech serpentine belts are truly worry-free.
- Short Product Description
- Accessory Drive Kit
- CTO
- TR
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- Maximum Cases per Pallet Layer
- 6
- Pallet Layer Maximum
- 3
- Application Type
- Application Specific
- Belt Length (Inches)
- 94.65
- Belt Length (Metric)
- 2404.00
- Bullet Point 1
- All components are either the OE component or a direct fit to the original equipment.
- Bullet Point 2
- Serpentine belt delivers 98% power efficiency and the lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures.
- Bullet Point 3
- Serpentine Belt is designed to be oil-resistant and temperature-stable from -22DegF to 176DegF (-30DegC to 80DegC).
- Bullet Point 4
- The Serpentine Belt high performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design.
- Bullet Point 5
- Includes OE Quality idler and tensioner bearings for the accessory drive system.
- Bullet Point 6
- All components are either the OE component or a direct fit to the original equipment.
- Flight Restricted
- N
- Inches Size Stock
- PK060947
- Installation Instructions Included
- N
- Is the Installation Hardware Included
- Y
- Keep From Freezing
- N
- Link to Manufacturer Page
- www.contibelts.com
- MM Size Stock
- 6K2404
- Number of Teeth
- 6
- Qty of Belts in Kit
- 1
- Qty of Idlers in Kit
- 1
- Qty of Tensioner Bearings in Kit
- 2
- Warranty Distance
- 24000
- Warranty Distance UOM
- MI
- Warranty Time
- 24
- Warranty Time UOM
- MO
Specifications
The CRP/CONTITECH (INCHES) Accessory Drive Belt Kit contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2008 | Dodge | Sprinter 2500 | 3.5L | [Accessory Drive Belt Kit] Quantity needed per vehicle: 1 |
Warranty Information
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages.
For other parts, we provide a limited warranty of 90 days from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quality. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
All items are given a limited 90-days warranty period by the manufacturer. The manufacturer will allow the parts to be covered by their warranty provided that the part was not modified by the buyer.
Under NO circumstances will our liability exceed the amount of the original sale.
Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty.
The warranty does not cover airfreight charges, labor expenses, towing expenses, or rental car expenses resulting from installation errors. Return shipping is the responsibility of the buyer. We will not reimburse any return shipping charges incurred.
All returned items must have the RA (Return Authorization) number written outside the shipping box prior to return. The RA Numbers can be obtained by creating a return from within your account. Returned items without RA numbers will not be accepted.
Our liability does not cover lost or stolen packages mailed back by the customer containing the parts being claimed under warranty. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer.